Mini-Pro 1 / T-REX 600
CF Combo
Mini-Pro1 video
The Mount specs you are looking at will let you land or takeoff in any direction and also has the ability to rotate 360 degrees non stop without any wiring problems.
We are certified welding and CNCing almost every part, and again the mount is made from 6061T6 aluminum and Carbon fiber. The mount also incorporates metal geared servos and the proven clutch release system on the tilt function as well as adjustable Oring Roll dampening. Servo torque is 300oz on the pan and 147oz on the tilt. The Mini Pro1 has 6”of roll compensation along with the 360 drgees of pan and a 160degrees of tilt.
The camera head has now been widened to 6 inches to accept more types of cameras.
We didn’t cut any corners the mount ts built as strong as the Pro1 but lighter and smaller.
Dry weight of mount came it at 2lbs. 13oz’s. Pictured unit with the Sony V3 7.2 camera ,770JR PCM receiver with the downlink system all powered by a 730mah 3 cell lipo battery came in at 3lbs. 14oz’s. Mount comes like all of our other mounts completely assembled.
The system is designed to be used with any 50 size electric or nitro helicopter. It will also work for some
60 size electrics using Lipo batteries.
T-REX 600CF w/motor, ESC, BEC, Rx Battery
Key Features:
- Carbon fiber main frames
- Carbon fiber tail boom servo mount
- Aluminum head block
- Aluminum washout base
- Aluminum swashplate
- Carbon fiber tail rotor blades
- Accepts 600mm main rotor blades (sold separately)
- Fiberglass canopy
The kit includes an Align 600XL brushless motor, 75-amp brushless ESC, 5.8V BEC/regulator and 5.1V step-down, and 7.4V 1900mAh Li-Po receiver battery pack.
Needed to Complete:
6S 22.2V 4400-5000mAh Li-Po battery pack
Heading Lock gyro
Standard-Size Servos (4)
Radio System (Transmitter & Receiver)
600mm fiberglass or carbon fiber main rotor blades
Combo Price $1110.00
With Razor PRO 600mm blades $1180.00
| 
